Indirect Tensile Loading Fixtures

Indirect Tensile Loading Fixtures (Lottman Breaking Heads) are used with conventional Marshall Stability Load Frames to determine Indirect Tensile (IDT) or Lottman values of asphalt mixes. The MS-35 model is available for 4in (102mm) and MS-36 for 6in (152mm) specimens and each consists of a base with upright guide rods and a top with matching guide sleeves. The upper and lower stainless steel loading strips have concave contact surfaces.

Features:

• Stainless steel loading strips
• Available for 4 or 6in specimens

Included Items:

• Indirect Tensile Loading Fixture, 4 or 6in