Marshall Compactor, Automatic, Rotating, Double 4in Molds

MS-2 Marshall Compactor, Automatic, Rotating, Double 4in Molds compacts two 4in (102mm) asphalt specimens simultaneously in rotating-base molds. Tapered-foot hammers and rotating base plates produce a consistent kneading action during compaction. Molds rest on steel plates covering large oak pedestals during compaction. A powerful motor operates the hammer and rotation and the automatic counter automatically shuts off operation at the required number of blows. The compactor includes the counter, oak pedestal, two 10lb (4.54kg) tapered-foot hammers, and two 4in mold, base, and collar assemblies.

Features:

• Optimal for simultaneous compaction of two Marshall asphalt specimens
• Hammers and rotating base plates produce uniform kneading motion during compaction
• Automatic counter shuts off hammer blows at preset number
• Single motor operates hammer and rotation

Included Items:

• Marshall Compactor, Automatic, Rotating, Double 4in Molds (115V/60Hz or 230V/50Hz)
• Pedestal
• Automatic Counter
• Two 10lb (4.54kg) tapered-foot hammers
• Two 4in mold, base and collar assemblies

Accessories:

• MSA-101 4in Marshall Compaction Mold Assembly recommended as an additional assembly to increase efficiency
• MSA-120 4in Circular Paper Discs help keep asphalt samples from sticking to equipment
• MSA-112 4in Hammer Assembly available as additional unit to increase capacity
• Sample Ejectors easily remove asphalt samples from 4in molds