10in (254mm) Jaw Crushers have a maximum feed size of 8in (203mm) and final output size can be regulated from 0.25—3in (6—76mm) through clearance adjustment of the jaw plates. Throughput is approximately 1 to 2 tons (900 to 1,800kg) per hour. Jaw sizes are 10x6in (254x152mm) WxD and jaw plates are made from 0.75in (19mm) hard-faced abrasion resistant steel. Facing material has Brinell hardness of 450. Special abrasion-resistant LCA-415 Cast Manganese/Chrome Jaw Plates are available for longer life or for processing especially hard and tough materials. The main shaft is 2.4in (61mm) at the cam shaft and 2in (51mm) at the drive shaft. The efficient electric motor is supplied ready for wiring to a number of common three-phase voltage configurations from 208 to 460 volts.
LC-44G: operates with a 20hp Gasoline Engine.
LC-44D: operates with a 18hp Diesel Engine.
LC-44E: operates with a 10hp Electric Motor and the motor is shipped ready for wiring to a number of common three-phase voltage configurations from 208-460V.
- 10x6in (254x152mm) jaw size accommodates larger sample sizes
- 1 to 2 tons (900 to 1,800kg) throughput per hour
- Available with gas, diesel, or electric power options
- 10in Jaw Crusher (with 20hp gasoline or 18hp diesel engine, or 10hp electric motor)