Moist Cabinet for curing mortar and concrete test specimens has 11ft³ capacity and heated, triple-pane glass door to minimize condensation for observation of specimens. Remote alarms and RS-232 interface for temperature and humidity allow continuous monitoring and data acquisition with the user’s PC. An optional factory-installed 7-day chart recorder is available. The temperature range is from 32°—140°F (0°—60°C), settable in 0.2°F (0.1°C) increments. Heat output is 1750W (6,000BTUH) at 220V and 1600W (5,500BTUH) at 240V. Humidity controls are settable in 1.0% increments and maintain up to 95% humidity.
Positive horizontal airflow ensures temperature uniformity to ±0.6°F at 77°—98.6°F (±0.3°C at 25°—37°C). Uniformity at 0—25°C and 37—60°C is ±0.5°C. Chamber temperature and humidity are shown on LED displays. Audible and visible alarms indicate temperature and humidity variations beyond setpoints. Three stainless steel shelves with 50lb (23kg) stationary capacity, adjustable on 2in (50mm) centers are included. Up to eleven shelves are accommodated in the 31x27x24in (78.7x68.6x60.9cm) 20-gauge stainless steel chamber. Please inquire about extra standard shelves or perforated stainless steel shelves.
The exterior case is 18-gauge powder-coated steel. Heat is provided by two 600 Watt wire-wound elements. Cooling is via a 1/4hp, non-CFC compressor. A steam generator provides chamber humidity. The user-supplied water source must be rated between 50K-ohm and 1meg-ohm resistance.
- A heated triple-pane glass door minimizes condensation
- 18-gauge powder-coated steel exterior case
- Remote alarms and RS-232 interface allow for continuous monitoring
- Data-acquisition from user’s PC
- Settable humidity controls
- LED displays
- Accommodates up to 11 shelves
- Moist Cabinet (220V/60Hz, 14 Amp or 240V/50Hz, 13 Amp)
- Three 50lb (23kg) adjustable stainless steel shelves