The Portable Hammermill Crusher has a maximum feed size of 2in (51mm) and final output sizes as fine as No. 80 (0.2mm) are controlled by screen inserts. One LCA-422 standard screen with No. 35 (0.5mm) or LCA-418 No. 20 (1.0mm) openings is included; specify model at time of order. Other Screens with openings from 0.125in (3.18mm) to 0.3in (0.75mm) are sold separately. Inquire about Custom Screens available with any opening size. Screens are laser-cut from 1/4in (6mm) durable steel material.
These units offer approximately 1 to 2 tons (900 to 1,800kg) throughput per hour. The ten included 1.5in (38mm) wide 8lb (3.6kg) hammers are made from wear-resistant high-chrome steel for long service life. Production is higher and hammer life is enhanced by feeding 1in (25mm) material. The newly-designed, patent-pending non-slip disc system allows complete change-out of the hammers in less than ten minutes. Power is supplied by 30hp Gasoline or 24hp Diesel engines, or a 15hp Electric Motor that can be configured for three-phase electrical supplies from 208 to 460 volts. The drive shaft is 2in (51mm) diameter. Internal wear plates are 0.374in (9.5mm) and made of 400 Brinnell Hardness material.
The LC-47 series of crushers each offer the same features and capabilities, except that LC-47G is equipped with a 30hp gasoline engine, LC-47D has a 24hp diesel engine and LC-47E has a 15hp electric motor.
- 2in maximum feed size
- 1 to 2 tons of throughput per hour
- Custom screens are available
- Gas, diesel or electric power options
- Portable Hammermill Crusher, powered by 30hp gasoline or 24hp diesel engine, or 15hp electric motor
- Ten 8lb hammers
- One standard screen
- Extra Screens available in other popular sizes are used to control output of particle size