- US Sales
- International Sales
- Technical Support
- Human Resources
Curing Tank Heater is designed to maintain water temperatures in Concrete Curing Tanks up to 350gal (1,325L) for proper curing of concrete specimens. The heater maintains the required concrete curing temperature of 73.4°F ±3°F (23°C ±1.7°C) when ambient temperature is between 53°—72°F (12°—22°C).
One heater is recommended per 200 gallons of water. Additional tank heaters may be needed based on the size of tank, specimen loading, and ambient air temperature. Heating element must be immersed in water to a depth of no less than 12in (305mm) at all times.
The Heater has Incoloy shielded 19in (483mm) long element attached to a sealed stainless steel housing. A dial-type proportional controller regulates required temperatures in curing tanks. The 1,000-watt unit operates on 115V/60Hz power supplies and requires a 10-amp circuit. The heater is equipped with a 9ft long three-prong grounded plug, fuse, run light, and mounting bracket.
Note: For 230V operation order TR-3002 3,000W Step-Up/Step-Down Transformer.
Enter your name, email, and questions below and we will reply during business hours (8am - 5pm EST, Monday through Friday).