Aquafog® Fogging Fans humidify concrete curing rooms up to 35ft (12m) long. The self-flushing system forces water through the fan blades, atomizing as the liquid exits the blades. High-speed centrifugal force and powerful air flow produce a high-quality fog with uniform distribution. The Foggers operate on ordinary water supplies, even well water, with 10 to 100psi pressures without the risk of clogging. Specialized pumps and filtering equipment are not needed.
Aquafog Fans are engineered for extreme conditions of 100% RH in corrosive environments. Units are constructed with stainless steel hardware, polyethylene enclosures, and anodized aluminum. NEMA-4 connections are standard and the units are powered by continuous-duty wash-down rated motors. Turbo XE models are supplied to operate at 115V/60Hz, but can be configured to operate on 230V/60Hz power supplies. The new GT 500 has separate models that operate on 115V/60Hz or 230V/60Hz power. “F” models all operate on 230V/50Hz.
Each unit is equipped with an adjustable bracket, 12ft (3.7m) heavy-duty power cord, 20ft (6m) water line, 16ft (4.9m) drain line, and a Visual Flowmeter Panel. Rooms wider than about 24ft (6m) will have more uniform humidification with use of the HMA-402 Oscillator, adjustable for up to 360° rotation. All Aquafog models can be supplied with higher capacity flowmeters for increased fog output in larger rooms. A fogger with too much output may saturate wall surfaces while humidification remains inadequate. Proper humidification can also be affected by heating and ventilation systems, room air exchange rate and other factors. Contact Gilson for advice on correct sizing for your application.
HM-633 Aquafog® GT 500 is the newest model, and is designed for rooms up to 680ft² (63m²) with fog output of 5gal (19L) per hour. The quiet and energy-efficient fogger uses a 1/4hp continuous duty, washdown-rated motor. Fan output is 2,000cfm (57cmm).
HM-631 Aquafog® Small Turbo XE is for rooms from 400 to 700ft² (37 to 65m²). Fan is rated at 1,760cfm (50cmm) with 5gal (19L) per hour fog output. 50Hz “F” model has 1,870cfm (53cmm) and 7gal (265L) per hour output.
HM-632 Aquafog® Large Turbo XE is for larger rooms from 750 to 1,150ft² (70 to 107m²). The fan is rated at 2,160cfm (61cmm) and has a fog output of 11gal (42L) per hour. The 50Hz “F” model has 2,580cfm (73cmm) output at 14gal (53L) per hour.
- Self-flushing system
- Offers uniform distribution of high-quality fog
- No special water, pumps or filtering equipment is required
- Can handle extreme conditions
- Stainless steel and anodized aluminum construction
- Polyethylene enclosure
- HM-633 Aquafog® GT 500 (115V/60Hz), or
HM-633V Aquafog® GT 500 (230V/60Hz), or
HM-633F Aquafog® GT 500 (230V/50Hz), or
HM-631 Aquafog® Small Turbo XE (115V/60Hz), or
HM-631F Aquafog® Small Turbo XE (230V/50Hz), or
HM-632 Aquafog® Large Turbo XE (115V/60Hz), or
HM-632F Aquafog® Large Turbo XE (230V/50Hz)