Vent Master 120 option for MF-4A and MF-6A Series Laboratory Muffle Furnaces actively and effectively removes fumes. The powered exhaust venting system draws air from the kiln, dilutes it with room air, and pushes it outside through a vent hose. The Vent Master is equipped with a 36inx2in (914x51mm) LxDia. duct that runs from the collection cup to the blower motor. A user-supplied 4in (102mm) aluminum dryer duct or PVC pipe between the motor and the vent outlet is required. Existing furnaces will require drilling of 0.25in holes. If ordered when also purchasing a furnace, holes will be drilled at the factory for no extra charge. The product requires a 120V/60Hz outlet.
- Vents noxious fumes to the outdoors
- Powered exhaust system