Cube Maker System, 2x2in

Cube Maker System, 2x2in (51x51mm), is used for mortar, grout, and cement testing, is acceptable for in-house quality control, and has a three-gang aluminum Mold Frame that holds disposable single-use polypropylene liners. Liners strip away when cured cubes are lifted from the frame, a process that virtually eliminates clean-up of the frame. The Cube Maker System includes two stainless steel retainers for compression testing when fitted with Pad Caps and also comes with two red and two amber unbonded polyurethane Pad Caps. The red caps are for strengths up to 4,000psi (27.6mPa) and the amber caps are for strengths exceeding 4,000psi. The caps may be reused up to 300 times. 27 Extra Liners are included.

Additional three-gang mold frames can reduce sample preparation time and increase production. Extra liners, cap pads, and mold frames are ordered separately.

View our full line of Cube Molds.

Features:

• No clean-up needed for Mold Frame
• Provides in-house quality control

Included Items:

• 2x2in Cube Maker System
• Two stainless steel Retainers
• Aluminum Mold Frame
• (27) Disposable Polypropylene Mold Liners
• Two red and two amber Pad Caps

Accessories:

• HMA-139 Extra Aluminum Mold Frame for Cube Maker System increases production
• Trowel with flat blade and wooden handle to use with specimens
• HMA-140 Extra Liners for Cube Maker System is disposable polypropylene, sold in case of 196
• HMA-141 Extra Pad Caps for Cube Maker System Retainers can be used up to 300 times
• HMA-298 Rubber Tamper for Cube Molds is required by certain specifications when consolidating mortar or grout specimens

Related blogs:

• Cement Testing Resource Guide: Methods & Equipment